Matter Cluster 768 — Color Control Cluster

Cluster Identity

Revision history

Shadow Path Format

Cluster 768 values in the device shadow use this format:

endpoint_id / 768 / attribute_id

Example:

{
  "1/768/8": 0
}

Cluster 768 Features

The FeatureMap attribute (1/768/65532) is a bitmap. Each bit set means the device implements that feature and the attributes and commands that depend on it.

Example: FeatureMap = 0 means no optional feature is enabled; 31 means every feature listed above is enabled.

Data Types

ColorLoopActionEnum

ColorLoopDirectionEnum

ColorModeEnum

DirectionEnum

DriftCompensationEnum

EnhancedColorModeEnum

MoveModeEnum

StepModeEnum

ColorCapabilitiesBitmap (bitmap)

OptionsBitmap (bitmap)

UpdateFlagsBitmap (bitmap)

This data type is derived from map8 and is used in the ColorLoopSet command.

Cluster 768 Attributes

Cluster 768 defines 52 attributes plus the global attributes. Conformance: M mandatory, O optional, a feature code means "mandatory when that feature is present", square brackets mean "optional when …".

Global attributes

Attribute Details

Attribute 0 / 0x0000 — CurrentHue

Path example:

1/768/0

The CurrentHue attribute contains the current hue value of the light. It is updated as fast as practical during commands that change the hue. The hue in degrees is related to the CurrentHue attribute by the relationship: where CurrentHue is in the range from 0 to 254 inclusive. Changes to this attribute only be marked as reportable in the following cases: - At most once per second or - At the end of the movement/transition.

Example:

{
  "1/768/0": 1
}

Attribute 1 / 0x0001 — CurrentSaturation

Path example:

1/768/1

Indicates the current saturation value of the light. It is updated as fast as practical during commands that change the saturation. The saturation (on a scale from 0.0 to 1.0) is related to the CurrentSaturation attribute by the relationship: where CurrentSaturation is in the range from 0 to 254 inclusive. Changes to this attribute only be marked as reportable in the following cases: - At most once per second or - At the end of the movement/transition.

Example:

{
  "1/768/1": 1
}

Attribute 2 / 0x0002 — RemainingTime

Path example:

1/768/2

Indicates the time remaining, in 1/10ths of a second, until transitions due to the currently active command will be complete. Changes to this attribute only be marked as reportable in the following cases: - When it changes from 0 to any value higher than 10, or - When it changes, with a delta larger than 10, caused by the invoke of a command, or - When it changes to 0. For commands with a transition time or changes to the transition time less than 1 second, changes to this attribute must NOT be reported. As this attribute is not being reported during a regular countdown, clients should NOT rely on the reporting of this attribute in order to keep track of the remaining duration.

Example:

{
  "1/768/2": 0
}

Attribute 3 / 0x0003 — CurrentX

Path example:

1/768/3

Indicates the current value of the normalized chromaticity value x, as defined in the CIE xyY Color Space. It is updated as fast as practical during commands that change the color. The value of x is related to the CurrentX attribute by the relationship where CurrentX is in the range from 0 to 65279 inclusive. Changes to this attribute only be marked as reportable in the following cases: - At most once per second or - At the end of the movement/transition.

Example:

{
  "1/768/3": 1
}

Attribute 4 / 0x0004 — CurrentY

Path example:

1/768/4

Indicates the current value of the normalized chromaticity value y, as defined in the CIE xyY Color Space. It is updated as fast as practical during commands that change the color. The value of y is related to the CurrentY attribute by the relationship where CurrentY is in the range from 0 to 65279 inclusive. Changes to this attribute only be marked as reportable in the following cases: - At most once per second or - At the end of the movement/transition.

Example:

{
  "1/768/4": 1
}

Attribute 5 / 0x0005 — DriftCompensation

Path example:

1/768/5

Indicates what mechanism, if any, is in use for compensation for color/intensity drift over time.

Values (DriftCompensationEnum):

Example:

{
  "1/768/5": 0
}

Attribute 6 / 0x0006 — CompensationText

Path example:

1/768/6

This attribute contains a textual indication of what mechanism, if any, is in use to compensate for color/intensity drift over time.

Example:

{
  "1/768/6": "example"
}

Attribute 7 / 0x0007 — ColorTemperatureMireds

Path example:

1/768/7

Indicates a scaled inverse of the current value of the color temperature. The unit of ColorTemperatureMireds is the mired (micro reciprocal degree), a.k.a. mirek (micro reciprocal kelvin). It is updated as fast as practical during commands that change the color. Changes to this attribute only be marked as reportable in the following cases: - At most once per second or - At the end of the movement/transition.

Example:

{
  "1/768/7": 1
}

Attribute 8 / 0x0008 — ColorMode

Path example:

1/768/8

Indicates which attributes are currently determining the color of the device. The value of the ColorMode attribute cannot be written directly - it is set upon reception of any command in section Commands to the appropriate mode for that command.

Values (ColorModeEnum):

Example:

{
  "1/768/8": 0
}

Attribute 15 / 0x000F — Options

Path example:

1/768/15

Indicates a bitmap that determines the default behavior of some cluster commands. Each command that is dependent on the Options attribute must first construct a temporary Options bitmap that is in effect during the command processing. The temporary Options bitmap has the same format and meaning as the Options attribute, but includes any bits that may be overridden by command fields. This attribute is meant to be changed only during commissioning.

Bits (OptionsBitmap):

Example:

{
  "1/768/15": 0
}

Attribute 16 / 0x0010 — NumberOfPrimaries

Path example:

1/768/16

Indicates the number of color primaries implemented on this device. A value of null indicates that the number of primaries is unknown. Where this attribute is implemented, the attributes below for indicating the “x” and “y” color values of the primaries must also be implemented for each of the primaries from 1 to NumberOfPrimaries, without leaving gaps. Implementation of the Primary1Intensity attribute and subsequent intensity attributes is optional.

Example:

{
  "1/768/16": 1
}

Attribute 17 / 0x0011 — Primary1X

Path example:

1/768/17

Indicates the normalized chromaticity value x for this primary, as defined in the CIE xyY Color Space. The value of x is related to the Primary1X attribute by the relationship x = Primary1X / 65536 (Primary1X in the range 0 to 65279 inclusive)

Example:

{
  "1/768/17": 1
}

Attribute 18 / 0x0012 — Primary1Y

Path example:

1/768/18

Indicates the normalized chromaticity value y for this primary, as defined in the CIE xyY Color Space. The value of y is related to the Primary1Y attribute by the relationship y = Primary1Y / 65536 (Primary1Y in the range 0 to 65279 inclusive)

Example:

{
  "1/768/18": 1
}

Attribute 19 / 0x0013 — Primary1Intensity

Path example:

1/768/19

Indicates a representation of the maximum intensity of this primary, normalized such that the primary with the highest maximum intensity contains the value 254. A value of null indicates that this primary is not available.

Example:

{
  "1/768/19": 1
}

Attribute 21 / 0x0015 — Primary2X

Path example:

1/768/21

No condensed specification text is available for Primary2X; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/21": 1
}

Attribute 22 / 0x0016 — Primary2Y

Path example:

1/768/22

No condensed specification text is available for Primary2Y; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/22": 1
}

Attribute 23 / 0x0017 — Primary2Intensity

Path example:

1/768/23

No condensed specification text is available for Primary2Intensity; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/23": 1
}

Attribute 25 / 0x0019 — Primary3X

Path example:

1/768/25

No condensed specification text is available for Primary3X; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/25": 1
}

Attribute 26 / 0x001A — Primary3Y

Path example:

1/768/26

No condensed specification text is available for Primary3Y; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/26": 1
}

Attribute 27 / 0x001B — Primary3Intensity

Path example:

1/768/27

No condensed specification text is available for Primary3Intensity; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/27": 1
}

Attribute 32 / 0x0020 — Primary4X

Path example:

1/768/32

No condensed specification text is available for Primary4X; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/32": 1
}

Attribute 33 / 0x0021 — Primary4Y

Path example:

1/768/33

No condensed specification text is available for Primary4Y; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/33": 1
}

Attribute 34 / 0x0022 — Primary4Intensity

Path example:

1/768/34

No condensed specification text is available for Primary4Intensity; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/34": 1
}

Attribute 36 / 0x0024 — Primary5X

Path example:

1/768/36

No condensed specification text is available for Primary5X; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/36": 1
}

Attribute 37 / 0x0025 — Primary5Y

Path example:

1/768/37

No condensed specification text is available for Primary5Y; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/37": 1
}

Attribute 38 / 0x0026 — Primary5Intensity

Path example:

1/768/38

No condensed specification text is available for Primary5Intensity; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/38": 1
}

Attribute 40 / 0x0028 — Primary6X

Path example:

1/768/40

No condensed specification text is available for Primary6X; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/40": 1
}

Attribute 41 / 0x0029 — Primary6Y

Path example:

1/768/41

No condensed specification text is available for Primary6Y; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/41": 1
}

Attribute 42 / 0x002A — Primary6Intensity

Path example:

1/768/42

No condensed specification text is available for Primary6Intensity; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/42": 1
}

Attribute 48 / 0x0030 — WhitePointX

Path example:

1/768/48

Indicates the normalized chromaticity value x, as defined in the CIE xyY Color Space, of the current white point of the device. The value of x is related to the WhitePointX attribute by the relationship x = WhitePointX / 65536 (WhitePointX in the range 0 to 65279 inclusive)

Example:

{
  "1/768/48": 1
}

Attribute 49 / 0x0031 — WhitePointY

Path example:

1/768/49

Indicates the normalized chromaticity value y, as defined in the CIE xyY Color Space, of the current white point of the device. The value of y is related to the WhitePointY attribute by the relationship y = WhitePointY / 65536 (WhitePointY in the range 0 to 65279 inclusive)

Example:

{
  "1/768/49": 1
}

Attribute 50 / 0x0032 — ColorPointRX

Path example:

1/768/50

No condensed specification text is available for ColorPointRX; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/50": 1
}

Attribute 51 / 0x0033 — ColorPointRY

Path example:

1/768/51

No condensed specification text is available for ColorPointRY; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/51": 1
}

Attribute 52 / 0x0034 — ColorPointRIntensity

Path example:

1/768/52

Indicates a representation of the relative intensity of the red color point, normalized such that the color point with the highest relative intensity contains the value 254. A value of null indicates an invalid value.

Example:

{
  "1/768/52": 1
}

Attribute 54 / 0x0036 — ColorPointGX

Path example:

1/768/54

No condensed specification text is available for ColorPointGX; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/54": 1
}

Attribute 55 / 0x0037 — ColorPointGY

Path example:

1/768/55

No condensed specification text is available for ColorPointGY; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/55": 1
}

Attribute 56 / 0x0038 — ColorPointGIntensity

Path example:

1/768/56

No condensed specification text is available for ColorPointGIntensity; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/56": 1
}

Attribute 58 / 0x003A — ColorPointBX

Path example:

1/768/58

No condensed specification text is available for ColorPointBX; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/58": 1
}

Attribute 59 / 0x003B — ColorPointBY

Path example:

1/768/59

No condensed specification text is available for ColorPointBY; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/59": 1
}

Attribute 60 / 0x003C — ColorPointBIntensity

Path example:

1/768/60

No condensed specification text is available for ColorPointBIntensity; use the type, conformance and constraint below together with the cluster description above.

Example:

{
  "1/768/60": 1
}

Attribute 16384 / 0x4000 — EnhancedCurrentHue

Path example:

1/768/16384

Indicates the non-equidistant steps along the CIE 1931 color triangle, and it provides 16-bits precision. The upper 8 bits of this attribute is used as an index in the implementation specific XY lookup table to provide the non-equidistant steps. The lower 8 bits is used to interpolate between these steps in a linear way in order to provide color zoom for the user. To provide compatibility with clients not supporting EHUE, the CurrentHue attribute contains a hue value in the range 0 to 254, calculated from the EnhancedCurrentHue attribute.

Example:

{
  "1/768/16384": 1
}

Attribute 16385 / 0x4001 — EnhancedColorMode

Path example:

1/768/16385

Indicates which attributes are currently determining the color of the device. To provide compatibility with clients not supporting EHUE, the ColorMode attribute indicates CurrentHueAndCurrentSaturation when the EnhancedCurrentHue attribute indicates EnhancedCurrentHueAndCurrentSaturation. For other values of the EnhancedCurrentHue attribute, the value of the ColorMode attribute is the same as the value of the EnhancedCurrentHue attribute. If the ColorMode attribute is changed, its new value is copied to the EnhancedColorMode attribute.

Values (EnhancedColorModeEnum):

Example:

{
  "1/768/16385": 0
}

Attribute 16386 / 0x4002 — ColorLoopActive

Path example:

1/768/16386

Indicates the current active status of the color loop. If this attribute has the value 0, the color loop must NOT be active. If this attribute has the value 1, the color loop is active.

Example:

{
  "1/768/16386": 1
}

Attribute 16387 / 0x4003 — ColorLoopDirection

Path example:

1/768/16387

Indicates the current direction of the color loop. If this attribute has the value Decrement, the EnhancedCurrentHue attribute is decremented. If this attribute has the value Increment, the EnhancedCurrentHue attribute is incremented.

Values (ColorLoopDirectionEnum):

Example:

{
  "1/768/16387": 0
}

Attribute 16388 / 0x4004 — ColorLoopTime

Path example:

1/768/16388

Indicates the number of seconds it must take to perform a full color loop, i.e., to cycle all values of the EnhancedCurrentHue attribute (between 0 and 65534).

Example:

{
  "1/768/16388": 0
}

Attribute 16389 / 0x4005 — ColorLoopStartEnhancedHue

Path example:

1/768/16389

Indicates the value of the EnhancedCurrentHue attribute from which the color loop is started.

Example:

{
  "1/768/16389": 1
}

Attribute 16390 / 0x4006 — ColorLoopStoredEnhancedHue

Path example:

1/768/16390

Indicates the value of the EnhancedCurrentHue attribute before the color loop was started. Once the color loop is complete, the EnhancedCurrentHue attribute is restored to this value.

Example:

{
  "1/768/16390": 1
}

Attribute 16394 / 0x400A — ColorCapabilities

Path example:

1/768/16394

Indicates the color control capabilities of the device. Bits 0-4 of the ColorCapabilities attribute has the same values as the corresponding bits of the FeatureMap attribute. All other bits in ColorCapabilities is 0.

Bits (ColorCapabilitiesBitmap):

Example:

{
  "1/768/16394": 0
}

Attribute 16395 / 0x400B — ColorTempPhysicalMinMireds

Path example:

1/768/16395

Indicates the minimum mired value supported by the hardware. ColorTempPhysicalMinMireds corresponds to the maximum color temperature in kelvins supported by the hardware. ColorTempPhysicalMinMireds $<=$ ColorTemperatureMireds.

Example:

{
  "1/768/16395": 1
}

Attribute 16396 / 0x400C — ColorTempPhysicalMaxMireds

Path example:

1/768/16396

Indicates the maximum mired value supported by the hardware. ColorTempPhysicalMaxMireds corresponds to the minimum color temperature in kelvins supported by the hardware. ColorTemperatureMireds $<=$ ColorTempPhysicalMaxMireds.

Example:

{
  "1/768/16396": 1
}

Attribute 16397 / 0x400D — CoupleColorTempToLevelMinMireds

Path example:

1/768/16397

Indicates a lower bound on the value of the ColorTemperatureMireds attribute for the purposes of coupling the ColorTemperatureMireds attribute to the CurrentLevel attribute when the CoupleColorTempToLevel bit of the Options attribute of the Level Control cluster is equal to 1. When coupling the ColorTemperatureMireds attribute to the CurrentLevel attribute, this value must correspond to a CurrentLevel value of 254 (100%).

Example:

{
  "1/768/16397": 100
}

Attribute 16400 / 0x4010 — StartUpColorTemperatureMireds

Path example:

1/768/16400

Indicates the desired startup color temperature value the light must use when it is supplied with power and this value is reflected in the ColorTemperatureMireds attribute. In addition, the ColorMode and EnhancedColorMode attributes is set to 2 (ColorTemperatureMireds). The values of the StartUpColorTemperatureMireds attribute are listed in the table below,

Example:

{
  "1/768/16400": 1
}

Cluster 768 Commands

Cluster 768 has 19 client-to-server commands and 0 responses.

AcceptedCommandList

The AcceptedCommandList attribute lists the command IDs the endpoint actually implements:

endpoint_id / 768 / 65529

{
  "1/768/65529": [
    0,
    1,
    2,
    3,
    4,
    5,
    6,
    7,
    8,
    9,
    10,
    64,
    65,
    66,
    67,
    68,
    71,
    75,
    76
  ]
}

Bridge Command Payload Format

The bridge accepts Matter commands in this structure:

{
  "message_id": "1",
  "command": "device_command",
  "args": {
    "endpoint_id": 1,
    "cluster_id": 768,
    "command_name": "MoveToHue",
    "payload": {},
    "timed_request_timeout_ms": 1000
  }
}

For Cluster 768, always use "cluster_id": 768. Payload keys are the command field names in lowerCamelCase. Octet-string fields are base64-encoded. timed_request_timeout_ms is required for timed commands and ignored otherwise.

Command: MoveToHue

Purpose

This command will move the device to the requested hue using a transition.

Command Identity

Payload Fields

Direction values (DirectionEnum): 0 = Shortest, 1 = Longest, 2 = Up, 3 = Down

Bridge Command Example

{
  "message_id": "1",
  "command": "device_command",
  "args": {
    "endpoint_id": 1,
    "cluster_id": 768,
    "command_name": "MoveToHue",
    "payload": {
      "hue": 1,
      "direction": 0,
      "transitionTime": 0,
      "optionsMask": 0,
      "optionsOverride": 0
    }
  }
}

Command: MoveHue

Purpose

This command will change the hue of the device with a requested rate.

Command Identity

Payload Fields

MoveMode values (MoveModeEnum): 0 = Stop, 1 = Up, 3 = Down

Bridge Command Example

{
  "message_id": "1",
  "command": "device_command",
  "args": {
    "endpoint_id": 1,
    "cluster_id": 768,
    "command_name": "MoveHue",
    "payload": {
      "moveMode": 0,
      "rate": 1,
      "optionsMask": 0,
      "optionsOverride": 0
    }
  }
}

Command: StepHue

Purpose

This command will change the hue of the device using a step and transition.

Command Identity

Payload Fields

StepMode values (StepModeEnum): 1 = Up, 3 = Down

Bridge Command Example

{
  "message_id": "1",
  "command": "device_command",
  "args": {
    "endpoint_id": 1,
    "cluster_id": 768,
    "command_name": "StepHue",
    "payload": {
      "stepMode": 1,
      "stepSize": 1,
      "transitionTime": 0,
      "optionsMask": 0,
      "optionsOverride": 0
    }
  }
}

Command: MoveToSaturation

Purpose

This command will move the device to the requested saturation using a transition.

Command Identity

Payload Fields

Bridge Command Example

{
  "message_id": "1",
  "command": "device_command",
  "args": {
    "endpoint_id": 1,
    "cluster_id": 768,
    "command_name": "MoveToSaturation",
    "payload": {
      "saturation": 1,
      "transitionTime": 0,
      "optionsMask": 0,
      "optionsOverride": 0
    }
  }
}

Command: MoveSaturation

Purpose

This command will change the saturation of the device with a requested rate.

Command Identity

Payload Fields

MoveMode values (MoveModeEnum): 0 = Stop, 1 = Up, 3 = Down

Bridge Command Example

{
  "message_id": "1",
  "command": "device_command",
  "args": {
    "endpoint_id": 1,
    "cluster_id": 768,
    "command_name": "MoveSaturation",
    "payload": {
      "moveMode": 0,
      "rate": 1,
      "optionsMask": 0,
      "optionsOverride": 0
    }
  }
}

Command: StepSaturation

Purpose

This command will change the saturation of the device using a step and transition.

Command Identity

Payload Fields

StepMode values (StepModeEnum): 1 = Up, 3 = Down

Bridge Command Example

{
  "message_id": "1",
  "command": "device_command",
  "args": {
    "endpoint_id": 1,
    "cluster_id": 768,
    "command_name": "StepSaturation",
    "payload": {
      "stepMode": 1,
      "stepSize": 1,
      "transitionTime": 0,
      "optionsMask": 0,
      "optionsOverride": 0
    }
  }
}

Command: MoveToHueAndSaturation

Purpose

This command will move the device to the requested hue and saturation using a transition.

Command Identity

Payload Fields

Bridge Command Example

{
  "message_id": "1",
  "command": "device_command",
  "args": {
    "endpoint_id": 1,
    "cluster_id": 768,
    "command_name": "MoveToHueAndSaturation",
    "payload": {
      "hue": 1,
      "saturation": 1,
      "transitionTime": 0,
      "optionsMask": 0,
      "optionsOverride": 0
    }
  }
}

Command: MoveToColor

Purpose

This command will move the device to the requested color using a transition.

Command Identity

Payload Fields

Bridge Command Example

{
  "message_id": "1",
  "command": "device_command",
  "args": {
    "endpoint_id": 1,
    "cluster_id": 768,
    "command_name": "MoveToColor",
    "payload": {
      "colorX": 1,
      "colorY": 1,
      "transitionTime": 0,
      "optionsMask": 0,
      "optionsOverride": 0
    }
  }
}

Command: MoveColor

Purpose

This command will change the color of the device with a requested rate.

Command Identity

Payload Fields

Bridge Command Example

{
  "message_id": "1",
  "command": "device_command",
  "args": {
    "endpoint_id": 1,
    "cluster_id": 768,
    "command_name": "MoveColor",
    "payload": {
      "rateX": 1,
      "rateY": 1,
      "optionsMask": 0,
      "optionsOverride": 0
    }
  }
}

Command: StepColor

Purpose

This command will change the color of the device using a step and transition.

Command Identity

Payload Fields

Bridge Command Example

{
  "message_id": "1",
  "command": "device_command",
  "args": {
    "endpoint_id": 1,
    "cluster_id": 768,
    "command_name": "StepColor",
    "payload": {
      "stepX": 1,
      "stepY": 1,
      "transitionTime": 0,
      "optionsMask": 0,
      "optionsOverride": 0
    }
  }
}

Command: MoveToColorTemperature

Purpose

This command will move the device to the requested color temperature using a transition.

Command Identity

Payload Fields

Bridge Command Example

{
  "message_id": "1",
  "command": "device_command",
  "args": {
    "endpoint_id": 1,
    "cluster_id": 768,
    "command_name": "MoveToColorTemperature",
    "payload": {
      "colorTemperatureMireds": 1,
      "transitionTime": 0,
      "optionsMask": 0,
      "optionsOverride": 0
    }
  }
}

Command: EnhancedMoveToHue

Purpose

This command allows the light to be moved in a smooth continuous transition from their current hue to a target hue.

Command Identity

Payload Fields

Direction values (DirectionEnum): 0 = Shortest, 1 = Longest, 2 = Up, 3 = Down

Bridge Command Example

{
  "message_id": "1",
  "command": "device_command",
  "args": {
    "endpoint_id": 1,
    "cluster_id": 768,
    "command_name": "EnhancedMoveToHue",
    "payload": {
      "enhancedHue": 1,
      "direction": 0,
      "transitionTime": 0,
      "optionsMask": 0,
      "optionsOverride": 0
    }
  }
}

Command: EnhancedMoveHue

Purpose

This command allows the light to start a continuous transition starting from their current hue.

Command Identity

Payload Fields

MoveMode values (MoveModeEnum): 0 = Stop, 1 = Up, 3 = Down

Bridge Command Example

{
  "message_id": "1",
  "command": "device_command",
  "args": {
    "endpoint_id": 1,
    "cluster_id": 768,
    "command_name": "EnhancedMoveHue",
    "payload": {
      "moveMode": 0,
      "rate": 1,
      "optionsMask": 0,
      "optionsOverride": 0
    }
  }
}